-
Now with V6 Firmware
Assign each knob of a PRO Mixer to any mono channel, stereo pair of channels, or even a submix of up to 16 channels with the V6 update. Configure each Mixer differently and add up to 128 input channels to the system using additional Input Cards and Hubs (32 channels of inputs per Hub).
New V6 Features
- PRO Digital Overlay compatibility
- Allows 32 channel digital input cards (e.g. Dante, Waves, MADI)
- Route-Assign-Submix up to 128 channels
- Submix up to 16 stereo channels on each of the 16 knobs per Mixer
- Up to 64 pairs of stereo-linked channels
- Up to 32 input channels per Hub
Key Features
- Panning width and stereo placement
- Solo in place
- Multiple Intercom
- Preset copy and paste from one Mixer to another
- Signal present indication on all channels
- Mirroring function synchronizes all settings between multiple Mixers
- iOS/macOS App available for ease of use
- Remote control of all settings via iOS/macOS App or from another Mixer
-
Analog Output Card
Can be utilized with the Hear Back PRO or WSG Bridge to provide 8 consecutive balanced channel outputs on a single DB25 connector.
- Connects via a Tascam DA-88 style pinout on a DB25 connector
- Can be paired with any of the Hear Back PRO input card options
- Supports 44.1k, 48k, 88.2k, 96k, 176.4k, and 192k sampling rates
- Can be used with the WSG Bridge to monitor any block of 8 channels from the Waves or Dante inputs
-
Analog Input Card
Allows HB PRO Hub to communicate with any professional analog audio equipment. Provides (8) balanced audio inputs using a standard Tascam DA-88-style pin-out on a DB25 connector. A DB25 to 1/4-inch TRS break-out cable is sold separately, unless the Analog input card is purchased as part of the Hear Back PRO Four Pack.
- -10dB pad on each channel allows the user to select +8dB or +18dB maximum input sensitivity level
- Custom input sensitivities available up to +34dB upon special request
- User configurable sampling rates of 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, and 192kHz using jumpers
- (2) analog input cards are required to input 16 channels of audio
- Up to (4) cards can be populated per Hub to allow A/B input switching between (2) banks of 16 channels
