Product News
2020/09/24
6301N Series ACTIVE MONITOR
- 20W D-class power amplifier for higher output level and less power consumption with no heat sink
- Dedicated 4-inch full range driver for clear audio reproduction
- Flat panel design to avoid inadvertent power-off or level change
- Auto Stand-by mode (compliant to ErP directive) for energy saving
6301N Series Active Monitor
Model 6301-series have been on the market since 1982 as the standard active monitor speaker in the broadcast and production facilities and now we have re-design the speakers with the latest D-class power amplifier and new driver unit featuring energy saving “auto stand-by” function. New Dante* version (6301DT) has now been added to the series and will be available Summer 2020.
NEW Dante* version (Model 6301DT)
- Outputs either or both of any two-channel digital signals out of Dante network signals adopting Dante Ultimo chip
- Supported sampling frequencies: 44.1/48/88.2/96kHz
- Dante Input 1, Input 2 or Input 1+2 (mixed) can be selected by the switch on the rear panel
*"Dante" is a registered trademark of Audinate
Options
Options
- EB-6301 U-Bracket
The optional rugged EB-6301 U-Bracket for the 6301B/6301N series speakers is available providing a range of mounting options.
In Detail
- 20W D-class power amplifier for higher output level and less power consumption with no heat sink
- Dedicated 4-inch full range driver for clear audio reproduction
- Traditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series
- Flat panel design to avoid inadvertent power-off or level change
- Auto Stand-by mode (compliant to ErP directive) for energy saving
- Detachable IEC type power inlet with multi-voltage power handling
- Newly designed mounting bracket (EB-6301) for wall mounting with variable angle adjustments
Specifications
SPEAKER SECTION
Enclosure type: closed
Unit: 4” full range
Frequency response: 70 Hz – 15k Hz
Sound Pressure Level: 85dB / W (1m)
Maximum SPL: 98dB
AMPLIFIER SECTION
Inputs
All Models: Connector: 1/4” TS Phone (unbalanced)
Input Impedance: 10k ohm or more
6301NX Connector: XLR-3-31 (transformer balanced)
Input Impedance: 10k ohm or more
6301NE Connector: XLR-3-31 (electrically balanced)
Input Impedance: 10k ohm or more
6301ND Connector: XLR-3-31 (IEC 60958 AES/EBU)
Input Impedance: 110 ohm or more
6301DT Coonector: RJ45 (Dante)
Output (Thru)
6301ND Connector: XLR-3-32 (IEC 60958 AES/EBU)
Rated output: 20W
Distortion (T.H.D.): 0.05% (1kHz / 1W output)
Residual Noise: -70dBV or less (NB/NE/NX). -65dBV (DT)
-65dBV or less (ND)
Input Sensitivity: 1/4” TS phone: -14dBV (0.2Vr.m.s.)
XLR: +4dBu (1.2Vr.m.s.)
XLR(Digital): -12dBFS
Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level
GENERAL
Dimensions: 120 (W) x 189 (H) x 120 (D) mm
Weight: NB/NE/ND: 2.2kgs
NX/DT 2.3kgs
Power Requirement: AC 100 – 240V (50/60Hz)
Power Consumption: 10W (less than 0.5W in stand-by mode)