AutoRouter 20 location MM is a plug-and-play solution that is ready to be used straight from the box that does not require any initial setup or configuration. It contains pre- programmed special firmware stored in the device and is compatible with Optocore, Broaman, ProGrid and DiGiCo fiber systems as well as with AVB of S6L AVID and Yamaha TWINLANe. The firmware is not related to any externally connected devices or their firmware and does not influence the connected protocol or sample rate of the connected system.
AutoRouter 20 location MM automatically discovers mobile devices and adds them to the optical loop. When mobile device is disconnected or powered down, AutoRouter automatically closes the loop with the remaining devices. It always discovers and switches the links automatically to keep redundancy, without any user action – there is no need to control or change fiber patching by user.
• 20 location intelligent star topology
• Multimode (Singlemode or MixedMode Option available)
• Supports standalone Optocore, Digico Opto links or ProGrid by Clear-Com
• Supports AVID AVB and Yamaha TwinLANe
• No Software Configuration needed
• PLUG-AND-PLAY
• Dual power supply with automatic switchover
• Comprehensive status control via LED banks on the front
• Software monitoring
• Redundant PSUs
AutoRouter - 20 Location MM
20 Location MM system router for Optocore, ProGrid and DiGiCo fiber loops with dual power supply
AutoRouter 20 location MM is an intelligent auto patch bay that creates a 20 pointed star layout out of a loop topology with multimode connectivity. It can be used in the installation and live sound market, where mixed ring/star or star topology is more desirable due to a star based fibre cable layout. Redundant PSUs are standard and single mode connectivity is available.
TAG:
AutoRouter 20 location MM is a plug-and-play solution that is ready to be used straight from the box that does not require any initial setup or configuration. It contains pre- programmed special firmware stored in the device and is compatible with Optocore, Broaman, ProGrid and DiGiCo fiber systems as well as with AVB of S6L AVID and Yamaha TWINLANe. The firmware is not related to any externally connected devices or their firmware and does not influence the connected protocol or sample rate of the connected system.
AutoRouter 20 location MM automatically discovers mobile devices and adds them to the optical loop. When mobile device is disconnected or powered down, AutoRouter automatically closes the loop with the remaining devices. It always discovers and switches the links automatically to keep redundancy, without any user action – there is no need to control or change fiber patching by user.
• 20 location intelligent star topology
• Multimode (Singlemode or MixedMode Option available)
• Supports standalone Optocore, Digico Opto links or ProGrid by Clear-Com
• Supports AVID AVB and Yamaha TwinLANe
• No Software Configuration needed
• PLUG-AND-PLAY
• Dual power supply with automatic switchover
• Comprehensive status control via LED banks on the front
• Software monitoring
• Redundant PSUs
AutoRouter 20 location MM automatically discovers mobile devices and adds them to the optical loop. When mobile device is disconnected or powered down, AutoRouter automatically closes the loop with the remaining devices. It always discovers and switches the links automatically to keep redundancy, without any user action – there is no need to control or change fiber patching by user.
• 20 location intelligent star topology
• Multimode (Singlemode or MixedMode Option available)
• Supports standalone Optocore, Digico Opto links or ProGrid by Clear-Com
• Supports AVID AVB and Yamaha TwinLANe
• No Software Configuration needed
• PLUG-AND-PLAY
• Dual power supply with automatic switchover
• Comprehensive status control via LED banks on the front
• Software monitoring
• Redundant PSUs
