The C10-M is the latest innovation in line array technology. It incorporates an advanced transducer technology for both midrange and high frequency reproduction, both of which join a common waveguide. At least two amplifier channels are required, one 

for low freq., one for mid/hi which is coupled via an internal passive crossover network.

 
The centrally located mid/high section provides 15° vertical coverage and variable horizontal coverage. The horizontal pattern may be altered to optimize coverage within the context of the application. The horizontal coverage angle may be defined symmetrically or asymmetrically by standard angles between 70° and 120° in 10° increments or may be custom configured with continuously variable Clair TrueFit waveguides. The horn and waveguides are constructed, as all Clair waveguides are, with CNC machined Baltic birch plywood. This is symmetrically flanked by the C10-M low frequency sections. Each 10” low frequency driver is front loaded in its own tuned reflex chamber.

 
The C10-M speaker cabinet is designed to provide exceptional intelligibility and is capable of a frequency response of 50Hz–20kHz.

 
The C10-M has one of the most versatile, quick and easy to use rigging systems in the industry today. Each enclosure is equipped with structurally integrated bimodal rigging to allow for quick coverage angle adjustments for multiple venue arrangements. 

 
Rear rigging hardware allows for angle adjustments between 0 and 15 degrees at 1 degree increments. The C10 cabinet shares the same width as the C8 (dual 8” array) and CS118 (single 18” subwoofer) allowing for simple systematic compatibility and minimal adaptation accessories.

 
As with all Clair Brothers products, the C10-M is constructed of the finest Baltic birch plywood and finished with a rugged exterior epoxy to withstand the most demanding conditions.

 
The speaker grille is constructed of high-grade 14 gauge perforated steel and finished with a commercial grade powder coat finish.